Search
Vertical Plate Clamps

Vertical Plate Clamps (TS / TSE)

  • For vertical lifting and transporting of steel plates and structures.
  • Terrier TS/STS lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
  • The clamp is locked in closed as well as in open position.
  • Lifting capacity and jaw openings are clearly engraved in the body.
  • STS type clamps are supplied with a larger jaw opening.
  • Minimum W.L.L. is 10 % of the maximum W.L.L.

 

 


Vertical Plate Clamps (TSU / STSU)

  • For lifting and transporting steel plates and structures from all positions (horizontal, vertical and sidelong).
  • Articulated lifting shackle.
  • Terrier TSU /STSU lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
  • The clamp is locked in closed as well as in open position.
  • Lifting capacity and jaw openings are clearly engraved in the body.
  • STSU type clamps are supplied with a larger jaw opening.
  • Minimum W.L.L. is 10 % of the maximum W.L.L.


Crosby IP10 Vertical Plate Clamp

The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical
transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines. The IP10 lifting clamps with a WLL of 12t and above are fitted with special hookup facilities to enable easy placement of the clamp inhorizontal position.


Crosby IPU10 Universal Plate Clamp

The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of
sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side loading the clamp. The IPU10 lifting clamps with a WLL of 12t and up are fitted with special hook-up facilities to enable easy placement of the clamp in horizontal position.