RUD - WBG Load Ring

360o swivalling/180o pivoting

*Caution: During lifting, the ring of the lifting point can engage in any positin. The embossed WLL is for the worst case scenario (see image X). If the ring is manually adjusted to the horizontal position, higher WLL values in brackets () can be chosen (see image Y). In case of straight pull (see image Z: vertical load direction) Maximum WLL can be chosen. The nominal WLL can be increased acc. to the chart.

Swivelling lifting point:

  • Loadable in any direction. Safety factor 4:1
  • Turnable under load in vertical direction.
  • Not suitable for permanent swivelling under full load, especially in 90o direction.
  • Simple installation, just a thread hole is required.
  • Variable lengths (Vario) available.
  • Can also be used for through holes.
  • Bolts 100% magnetic crack detected! Surface protection CORRUD-DT (20 times better than zinc plating).
  • High tensile, approved suspension ring acc. EN 1677-4
  • Surface: Ring pink powder coating, housing zinc plated.
  • Type Vario with washer and 100% crack detected nut.
  • VWBG-V and VWBG are also available with Imperial thread.
  • Turning without jerk due to additional bush bearing washer.
  • Wear marks in the main load directions 45o <, 60o < and 90o <