NORDIC™ LIGHT TRUCK & SUV - STUDDED ALLOY CHAINS

7mm & 8mm* cross chains. Hardened alloy cross chains for extra durability and strength. Ideal for aggressive off-road applications & harsh weather conditions. Studs dig into driving surface for excellent traction.
Test fit to ensure your vehicle has the clearance for these chains prior to using them.

#0216
Spider Tensioner Sold Seperately

Available with
Cam Locks (QC)

Nordic Studded Singles

Hardened alloy cross chains for extra durability & strength. Ideal for offroad applications and harsh weather conditions. Studs dig into driving surface for excellent traction. Test fit to ensure your vehicle has the proper clearance for these chains prior to using them.

Application Light Truck & S.U.V.
Material Type Cross Chains
Material Size(s) (mm) 7mm & 8mm
Cross Chain Type Studded
Relative Durability Rating 6 out of 10
Off Road Traction Rating 10 out of 10
On Road Traction Rating 9 out of 10
Smooth Ride Rating 6 out of 10

 

Singles Cross Chain
Part No. Weight
S295 23 Kg (49 lbs) 6915
S296 24 Kg (52 lbs) 6915
S298* 25 Kg (54 lbs) 6926
S315 20 Kg (45 lbs) 6912
S320 23 Kg (51 lbs) 6912
S322 25 Kg (54 lbs) 6912
S332 26 Kg (57 lbs) 6913

Nordic Studded Triples

Hardened alloy cross chains for extra durability & strength. Ideal for offroad applications and harsh weather conditions. Studs dig into driving surface for excellent traction. Test fit to ensure your vehicle has the proper clearance for these chains prior to using them.

Application Light Truck & S.U.V.
Material Type Cross Chains
Material Size(s) (mm) 7mm
Cross Chain Type Studded
Relative Durability Rating 6 out of 10
Off Road Traction Rating 10 out of 10
On Road Traction Rating 9 out of 10
Smooth Ride Rating 6 out of 10

 

Triples Cross Chain
Part No. Weight
S715 35 Kg (77 lbs) 6912 
S720 38 Kg (84 lbs) 6913 
S722 42 Kg (93 lbs) 6912 
S732 45 Kg (100 lbs) 6913 

 

Request More Information

Information Required

10 + 8 =

Tire Chain General Information
ANATOMY OF A TIRE CHAIN

1. Fastener
(boomer) Joins and secures the ends of the chain together.

2. Quick Hook
(C-hook) inside hook.

3. Cross Chain
(cross links) Provides traction with the ground surface.

4. Cross Chain Hook
Secures cross chains to the side chain.

5. Side Chain
(side rails) Acts as the frame for tire chain construction.

6. Centre Rail
(triples only) Side chain in the middle of a 1/2 set of triple chains.

7. Cams/Cam Side Chain
Side chain with cams is available to make tightening chain easier

 

 

Chain Classification & Sizing

SAE Class “S”
Regular (non-reinforced) passenger tire chains and cables for vehicles with restricted wheel well clearances.
1.46” clearance on tread-face, 0.59” clearance on side-wall.
SAE Class “U”
Regular (non-reinforced) and lug reinforced passenger tire chains for vehicles with regular (non-restricted) wheel well clearances.
1.97” clearance on tread-face, 0.91” clearance on side-wall.
SAE Class “W”
Those passenger tire chains that use light truck components, as well as some light truck chains.
2.50” clearance on tread face, 1.50” clearance on side-wall.

Tire Clearance

TIRE CHAIN

MINIMUM DIMENSIONS MINIMUM DIMENSIONS
IDENTIFICATION A C
SAE CLASS "S" 37mm (1.46”) 15mm (0.59”)
SAE CLASS "U" 50mm (1.97”) 23mm (0.91”)
SAE CLASS "W" 63.5mm (2.5”) 38.1mm (1.5”)

NOTE : For design purposes, “D” is the maximum crown tire section width as established by the Tire and Rim Association (TRA). The minimum clearances specified  must be maintained around spring clips, spring bolts, fenders, braces, splash pans, fuel  lines, brake lines, brake controls, and wherever necessary.

Tire size must be known in  order to select a tire chain of correct fit. For passenger cars, vans, and small pick-up  trucks, it is important to check the owner’s manual. The restricted wheel clearances in  most of today’s downsized and front drive vehicles may require the use of SAE Class “S”  tire chains, as noted. Check your owners manual for information regarding your vehicle.

Tire Chain Mounting Styles

 

SINGLE MOUNTS (SINGLES)

TRIPLE MOUNTS (TRIPLES)

1/2 pair of singles shown.
Cross chains span the width of one tire.
1/2 pair of triples shown. Centre side chain rail lies in-between the two tandem tires of a dual axle set up.
Advantage: Centre rail helps keep the cross chains fromshifting and twisting.
Tire Chain Warranty Policy

1. Super Slings will repair or replace product at our discretion and only after a thorough inspection or written warranty report has been completed on the product(s) in question. The following procedures must be followed for customers to apply for warranty & for Super Slings to process a warranty claim:
1. Send Super Slings photo(s) of each product in question. Each item & piece that is being claimed for warranty must have photos to back up the claim.
2. Provide application, hours of usage, machine type, tire size (if applicable) & part # of product in question.
3. Provide Super Slings invoice# & date of sale for verification of purchase.
4. Some products may be requested to be shipped back to Super Slings for further inspection/analysis.

If the above procedures are not followed, then Super Slings has the right of refusal on any warranty claim. Following the above procedures DOES NOT guarantee that the warranty claim will be granted. Super Slings will always work to process warranty claims as quickly as possible, however some warranty claims can require up to 8 weeks for proper and thorough evaluation.
2. Warranty DOES NOT include the following:
1. Any damage caused by alteration, storage, repair, or handling by the buyer.
2. Structural modifications made without manufacturer’s approval.
3. Excessive wear, not caused by production defects.
4. Products not used in accordance with manufacturer’s instructions.

Tire Chain Return Policy

1. No returned merchandise will be accepted by Super Slings without prior authorization (RGA # Required.). If products arrive without an authorized RGA # then Super Slings can refuse the shipment.
2. All return merchandise must have freight arranged or agreed upon by Super Slings. If RGA ’s arrive and they do not have the freight arranged or agreed upon by Super Slings, then Super Slings can refuse the shipment or bill the freight back to the customer.
3. All returns are subject to a minimum 30% restocking fee.
4. All custom builds and custom purchases are Non-Returnable & Non Refundable.
5. All products Super Slings classifies as Discontinued or Non-Stocking are Non-Returnable & Non Refundable.

BE THE FIRST ONE TO KNOW
OUR SPECIAL OFFERS

FOLLOW US